Ceramic fiber board is a kind of refractory material, which maintains stable impact toughness after heating. Pump it into the forming tank and mix it with air compression. Put the abrasives into the forming tank and suck the chemical fiber slurry on the die shell by using the basic principle of vacuum packaging. What is its flexural strength level?

When we scientifically study ceramic fiberboard, we analyzed the external economic appearance of improving the fracture of aluminum dihydrogen phosphate shell after bending and fracture. At this time, the reinforcing effect of the substrate is not significant, only 0.28mpa and 0.45MPa, an increase of about 12-19%. With the increase of chemical fiber composition to 0.6 and 0.8 percent, the total number of chemical fibers on the broken surface of ceramic fiber board slowly increased and evenly distributed in the shell, which shows that the chemical fibers are well dispersed in the coating preparation process, so the number of chemical fibers participating in the strengthening effect increased, thus showing the improvement of the overall strengthening effect.

At this time, the residue generated on the cracked surface of the commodity can observe the shrinkage condition, which is also caused by the elastic deformation in the whole process of chemical fiber cracking and debonding. According to the total number of chemical fibers, the residual shell can be noticed from the chemical fibers on the broken surface of the ceramic fiber board, which shows that the ceramic fiber board reasonably bears the load in the whole process of debonding, which shows that the analysis results of the test data are conducive to improving the bending characteristics of plywood.

Above is the bending strength level of ceramic fiber board, which can also be used as a reference in application. Nowadays, there are more and more areas producing such boards, which can also be used as a reference when ordering. We look forward to your assistance in the above contents.