Ceramic fiber board is made of ceramic fiber cotton as raw material, vacuum forming and treatment. The product has uniform structure and good heat resistance, and is suitable for engraving molds.

Ceramic fiber products are high-strength fiber plates produced with specific fire-resistant additives. This product has tough texture, high compressive strength, superior high-temperature resistance and excellent support; It can be used as an excellent refractory for fire prevention and heat insulation in the temperature range of industrial kiln.

The refractory ceramic fiber is made of ceramic fiber cotton and vacuum formed. Its strength is higher than that of fiber blanket and vacuum formed felt. It is suitable for applications requiring rigid strength of products.

In addition, according to the demand, there are vacuum formed ceramic fiber board products with higher capacity, and the heat insulation performance, wear resistance and strength of the board are further improved. The formula of ceramic fiber machine-made board and fire deflector contains a small amount of organic binder to enhance its cold strength. When it is burned for the first time at about 200 ℃ to 300 ℃, the organic matter can be reduced.

characteristic

Low heat capacity, low thermal conductivity, non brittle material, good elasticity, wind erosion and long service life

Excellent thermal stability and thermal shock resistance, rigidity, good peeling resistance of self-supporting plate, easy to form or cut

Typical application

Steel industry: expansion joint, backing insulation, heat insulation sheet and mold insulation

Non ferrous metal industry: tundish and runner cover are used for pouring copper or copper containing alloy

Ceramic industry: light kiln car structure and kiln hot surface lining, separation of various temperature zones of kiln and fire retaining glass industry: heat insulation of molten pool backing and burner block

Kiln building: hot surface refractory (instead of blanket), backing of heavy refractory, expansion joint

Light industry: lining of combustion chambers of industrial and domestic boilers

Petrochemical Industry: hot surface material for lining of high temperature heating furnace

Molds for deep processing products such as process glass

Note: the above data are representative average values measured according to general test methods and change with the fluctuation of normal production conditions. These data are provided as the inner cellar of a technical service and may be adjusted sometimes. Therefore, they should not be regarded as product indicators.