With the occurrence of ceramic fiberboard, more and more people choose this kind of material for interior decoration, not only because this kind of material has good product characteristics, but also because it is very convenient in engineering construction and installation. As everyone knows, in order to give better play to its effectiveness, it must be properly applied. So, what is the operation method of ceramic fiberboard?

1. After the completion of aluminum silicate fiber felt wall building, terminate the appearance renovation. The uneven areas must be drawn with tooling fixtures. If the gap is too large, the ceramic fiber board must be cut for renovation to make the appearance flat and close.

2. The thickness of ceramic fiber board lining shall meet the requirements.

3. Measure the thickness accurately. After measuring the length and total width, mark nine measuring points according to the places shown on the drawing. Place the disc of the needle thickness gauge flat on the test object, align the disc hole with both ends of the measuring point, and carefully insert the needle of the mouse cursor down into the disc hole. When the needle touches the test object, after the test object touches the glass, gently press and hold the mouse cursor to load the thickness.

4. The Al2O3 content of ceramic fiber board shall not be less than 45%.

5. The trial row of plywood shall be terminated before laying, and the separated layers shall be glued tightly with overlapping gaps.

Ceramic fiberboard is suitable for all kinds of high-temperature smoke exhaust duct of thermal insulation industrial kiln, waterproof sleeve of ventilation duct, door seal and curtain cloth of compensator. Petrochemical equipment, machinery and equipment. High temperature insulation and thermal insulation of vessels and pipelines. Protective clothing, rubber gloves, hats, hats and leather boots in high temperature natural environment. Engine thermal insulation materials. Exhaust pipe components of fuel oil automobile engine. Friction gaskets for composite braking system of high-speed racing car.

Ceramic fiberboard can be used to transfer high-temperature liquid and vapor pumps, refrigeration compressors and gate valves. Aluminum silicate fiber commodity can be used as the insulating layer of high-temperature household appliances. Fireproof doors and windows, fireproof safety curtains, fireproof blankets, flame connection pads and sound insulation covers. Aluminum silicate fiber products are suitable for thermal insulation, thermal insulation materials and brake system friction pads used in aerospace industry.

Ultra low temperature machinery and equipment. Thermal insulation and packaging of vessels and pipelines. Ceramic fiberboard can be used as a natural barrier for thermal insulation and fire safety in key occasions, such as archives, vaults and safes in office buildings, and its automatic fire safety curtain for fire fighting.